Pumps consist of three parts. They are the bulb, the release vault that makes the pressure release and the suction chamber. The penis is put inside the cylinder and then the pump is used until the pressure it’s enough. In order to stop irritation, most men use some lubrication to create a barrier and avoid chaffing.
So, how do you clean your device? Cleaning your pump is very important, just as you would with any toy, because good hygiene helps stop bacteria and increases your pump’s life.
If your pump is dishwasher safe, you just need to put it there and that’s it. But you will need to be careful and turn off the heat option because the tube can melt. The only about this is to make sure to check if the toy can be put in the dishwasher. If the box doesn’t say anything, just ask the manufacturer or try another method, just to be on the safe side.
The other way you can clean them is by gently washing it with some gentle soap and warm water. If you want to get thorough, use a damp cloth and rub off the lube and other things with it. You can rinse it with some water afterwards.
If you’re in a hurry you can also take an old cotton t-shirt and twist it down the tube. Pull out and twist it again, several times until it comes out clean. If you want to make sure your pump it’s sufficiently dry, you can also try this method.
Another quick method is to simply fill your tube about halfway in with warm water and add a few drops of soap or liquid detergent; then, you can shake it up and down as if you were shaking a cocktail (a very different cocktail wink*)
